Sprinklers Spray

Home > Sprinklers Spray


The sprinklers come with compact design, glass bulb type, available in several different finished and temperature ratings. The pendent sprinklers must be installed in pendent position and upright sprinklers are to be installed in the upright position, mostly above false ceiling.

Pendent Recessed Sprinklers are installed with adjustable or non-adjustable Escutcheon plates (also termed as rosette plates). These are intended to be installed with finished ceilings, Escutcheon plate adjustment provides, convenience in Pendent, Sprinkler installation in case of areas with finished ceilings or walls.

Type of sprinklers available: Pendent, Upright, Concealed Type & Sidewall

End connection: ½” BSPT or NPT (optional)

Temperature ratings: 57, 68, 79, 93, 141 & 182 Deg. C

Temperature Classifications: Ordinary (57 & 68 Deg. C), Intermediate: 79 & 93 Deg. C High: 141 Deg. C & Extra High 182 Deg. C

Response Type: Standard Response & Quick Response or Fast Response.

Note: All sprinklers operation required Pipeline system with Automatic starting operation of Pump sets. (Motor Driven or Engine Driven)

Approval: UL & FM


Medium Velocity Water Spray system (MVW)

Medium Velocity Water Spray Nozzles are open type (non-automatic nozzles) designed for directional spray application in fixed fire protection system.

Medium velocity water spray nozzle has an external deflector, which discharges water in a directional cone shaped pattern of small droplet size. The water is uniformly distributed over the surface to be protected.

Type: MV-A, MV-B & MV-E (without strainer) & MV-AS & MV-BS are with strainer

End connection: ½” BSPT or NPT (Optional)

Water Spray Angle: 140, 120, 110, 100, 90, 80 & 65 Deg.

K factor: K-18, K-22, K-30, K-35, K-41, K-51, K-64, K-79, K-91 & K-102

Finish: Natural Brass finish, Chrome plated Nickel plated, Epoxy Powder coated.

Approvals: Nozzle – UL Listed, FM Approval

High Velocity Water Spray System (HVW):

High Velocity Water Spray Nozzles are internal swirl plate type open nozzle designed for use in fixed water spray or deluge system for the fire protection application.

These nozzles produce solid uniform and dense core of high velocity water spray to effect, fire control. Nozzles are normally used to cool the surface as well as for extinguishment. HVW nozzles are typically used for Deluge protection of special hazard such as oil filled transformers, switch-gear, chemical process equipment, conveyor system and flammable liquid storage areas.

Model: HV-AS & HV-BS

End connection: 3/4” BSPT or NPT (optional)

Water Spray Angle & K Factor

75 Deg. – K 22

80 Deg. – K 18

90 Deg. – K 32

100 Deg. – K 26

115 Deg – K 42

120 Deg – K 23

Finish: Natural Brass finish, Chrome plated Nickel plated,.

Approvals: Nozzle – UL Listed